Viewing posts for the category RTiVISS

B-wind! v2.0 roadmap

The work we did at the AZ Residency allowed us to build a fully functional version of B-wind! adapted to fit a specific exhibition space.
We decided to call that version 1.0 to reflect the fact that for the first time all the little parts that make the installation work were in a functional stage. Our goal now is to work from this version on and evolve it to respond to our ongoing research work and to adapt it to the challenges of new exhibition spaces. In order to show that, we settled on a version naming scheme for the installation, where minor releases accompany our research work and major releases happen around public exhibition times.
So v2.0 will showcase all the work done in the installation until the next exhibition comes along. The first major version gave us a pretty good picture of how all the different parts that make up the system relate among themselves, and allowed us to simplify and abstract a lot of the complexity shown on previous system architecture diagrams (see above).
Currently, there are three main drivers for our research work towards the next major version of B-wind!: expressiveness, flexibility and efficiency.

expressiveness


Making someone feel like being the wind requires good action feedback, low control latency and expressive visual cues.
In this context good action feedback means making the wind generators' work at the remote location more expressive. For this to happen we need to focus on the wind generator design and control. We'll search for better and more powerful fans and look into how we can tweak the number of fans and their placement to get more expressive motion from the trees on the video stream.
Low control latency is also key to a good feeling of control. B-wind has a complex control feedback loop with lots of points where we can minimize latency. We will try to minimize motion tracking time and control signal generation at the installation and research latency prediction and compensation strategies to help with network lag to and from the remote location.
We will also look into making the visual cues presented to the participants at the installation a bit more expressive. Participants have found that the current fluid based distortion is perhaps a bit too subtle for the desired effect of power and control, so we will try and make the graphics a bit more impressive.

flexibility


The B-wind! setup has to be flexible to adapt to different exhibition spaces. We learned from our recent experience what are the parts that need to be more flexible, both at the hardware and software level.
B-wind hardware support needs to be more flexible to allow us to adapt to different room sizes and projection surfaces. This normally means using more than one camera for user input and more than one projector for graphics output.
We will also launch soon a project to kickstart the RTiVISS surveillance kit and we will try to redesign the remote part of B-wind! to use it for remote wind generation and video aquisition.
At the software level, we will focus on making the code more modular and implementing external configuration and tweaking of setup parameters.

efficiency


B-wind! has a lot of moving parts. Getting all of them to work together has been a tough but rewarding challenge. But now that everything is working we need to optimize it to work really fast. Modern hardware has a lot of computing power embedded both in the CPU cores and the GPU. Currently we're not making much use of it. We will work to better separate parts of the code that can be threaded effectively and to make better use of the graphics and stream processing power of the GPU.

Uff, that ' s a lot of ground to cover :) Stay tuned for B-wind! updates in the near future.

0 comments

Voting for RTiVISS at SXSW 2011: help make Big Brother Go Green

Remember when I've posted about my South by Southwest participation in March? For the next SXSW, me and Nuno Correia are now proposing a panel related to the ongoing research. Since voting from the public accounts for about 30% of the decision-making process for SXSW panel programming, I suggest you take a look at our proposal Big Brother Goes Green: Surveillance for Sustainable Forests »

Voting runs through August 27 and the process is simple, requiring that you register first and then return to the page http://panelpicker.sxsw.com/ideas/view/6736 to vote!
... or, starting at SXSW Panel Picker, link "Explore the Interactive Proposals'" and search the panels under the "Green / Sustainability" category, selecting "Big Brother Goes Green: Surveillance for Sustainable Forests" where you can vote and, eventually, leave your comments:)

Also, take a look at the other three CoLab participants from Portugal that submitted proposals to South By Southwest Interactive 2011 – and vote for us ;)))

4 comments

B-wind! @ O Espaço do Tempo v1.0

This is the first major release of the RTiVISS experience B-wind!, just in time for the AZ Labs exhibition @ O Espaço do Tempo. It reflects the work done over the two residency periods, and adaptations to fit available resources and space during the installation setup.

V1.0 includes multiple projection screens, inviting visitors to flow across the installation space. It uses available wired local network to cut back streaming video latency and an updated fan control code to use an Arduino-based DMX controller for the array of fans. We also set up a camera to capture the installation space and broadcast it live online for project documentation and remote maintenance.
Since the exhibition space is part of a convent surrounded by trees inside the walls of a castle, we managed to set up the remote location part of the installation just outside the exhibition space. This allowed us to optimize resource use — wired ethernet, power cables and DMX control equipment — and to make sure that sensitive equipment, like the IP camera, was kept inside the exhibition space at all times.
Having the two spaces so close together had an interesting effect. The fans rotating outside aroused curiosity that brought people to experience the interactive installation, and the experience of controlling a space so close by inspired people to go outside and see the trees and the fans working.

Now the exhibition is over but B-wind! development doesn't stop here, we still have a loads of information to process (ouch!).
The whole development experience was very intense and we certainly learned a lot from it. We also got some very good information from the feedback of installation users, and from the video recordings of their interactions.
We're already hard at work, improving the project for future presentations » Stay tuned for the upcoming B-wind 2.0!

4 comments

Entrepreneurship outcomes and presentation at Reitoria UL


http://areas.fba.ul.pt/msm/entrepreneurship/index.html

Os documentos apresentados como trabalhos do curso estão online acessíveis através da minha página principal:

http://www.monicamendes.info

I. "UL Empreender Course" e "PSP" remetem para o mapa conceptual geral, que por sua vez tem também os links para a apresentação e as entrevistas. Pode ser acedido directamente através de

http://www.monicamendes.info/entrepreneurship

II. "Interviews Entrepreneurs"

III. "PSP" com a apresentação/slideshow, acessível atraves dos links no título em cima e ao centro no mapa conceptual do curso

http://www.monicamendes.info/entrepreneurship

e directamente em

http://www.monicamendes.info/entrepreneurship/Entrepreneur_MonicaM_present.pdf

Os documentos apresentados como trabalhos do curso estão online acessíveis através da minha página principal:http://www.monicamendes.info
I. "UL Empreender Course" e "PSP" remetem para o mapa conceptual geral, que por sua vez tem também os links para a apresentação e as entrevistas. Pode ser acedido directamente através dehttp://www.monicamendes.info/entrepreneurship
II. "Interviews Entrepreneurs"
III. "PSP" com a apresentação/slideshow, acessível atraves dos links no título em cima e ao centro no mapa conceptual do cursohttp://www.monicamendes.info/entrepreneurship e directamente emhttp://www.monicamendes.info/entrepreneurship/Entrepreneur_MonicaM_present.pdf

0 comments

B-wind! opening » AZ labs @ O Espaço do Tempo

AZ Labs @ O Espaço do Tempo
Exhibition website »

AZ residency @ O Espaço do Tempo

Interactive installation
2010
---
Premiere at the AZ residency's result showcase and exhibition during the month of July 2010 at O Espaço do Tempo.

Concept and Coordination
Mónica Mendes

Team work with
Pedro Ângelo (programming)
Maurício Martins (electronics)
Ricardo Webbens (sound)
Sérgio Ferreira (live broadcasting)
Tiago Serra
Members of the three Audiência Zero creative labs: LCD, altLab,
and xDA

Technical Assistant
@ O Espaço do Tempo

António Costa

Exhibition Guide
@ O Espaço do Tempo

Francisco Gomes

PhD supervisors
Professor Nuno Correia
Professor Sílvia Chicó

In the scope of
Digital Media PhD
AZ labs artistic residency
B-wind project blog posts

0 comments

Page 4 of 8