Posted by: Mónica Mendes 10 years, 4 months ago

(4 comments)

This is the first major release of the RTiVISS experience B-wind!, just in time for the AZ Labs exhibition @ O Espaço do Tempo. It reflects the work done over the two residency periods, and adaptations to fit available resources and space during the installation setup.

V1.0 includes multiple projection screens, inviting visitors to flow across the installation space. It uses available wired local network to cut back streaming video latency and an updated fan control code to use an Arduino-based DMX controller for the array of fans. We also set up a camera to capture the installation space and broadcast it live online for project documentation and remote maintenance.
Since the exhibition space is part of a convent surrounded by trees inside the walls of a castle, we managed to set up the remote location part of the installation just outside the exhibition space. This allowed us to optimize resource use — wired ethernet, power cables and DMX control equipment — and to make sure that sensitive equipment, like the IP camera, was kept inside the exhibition space at all times.
Having the two spaces so close together had an interesting effect. The fans rotating outside aroused curiosity that brought people to experience the interactive installation, and the experience of controlling a space so close by inspired people to go outside and see the trees and the fans working.

Now the exhibition is over but B-wind! development doesn't stop here, we still have a loads of information to process (ouch!).
The whole development experience was very intense and we certainly learned a lot from it. We also got some very good information from the feedback of installation users, and from the video recordings of their interactions.
We're already hard at work, improving the project for future presentations » Stay tuned for the upcoming B-wind 2.0!

Currently unrated

Comments

B-wind! v2.0 roadmap « RTiVISS research | M& 10 years, 2 months ago

[...] work we did at the AZ Residency allowed us to build a fully functional version of B-wind! adapted to fit a specific exhibition space. We decided to call that version 1.0 to reflect the fact [...]

Link | Reply
Currently unrated

B-wind! v2.0 roadmap « RTiVISS research | M& 10 years, 2 months ago

[...] work we did at the AZ Residency allowed us to build a fully functional version of B-wind! adapted to fit a specific exhibition space. We decided to call that version 1.0 to reflect the fact [...]

Link | Reply
Currently unrated

B-wind! v2.0 roadmap « RTiVISS research | M& 10 years, 2 months ago

[...] work we did at the AZ Residency allowed us to build a fully functional version of B-wind! adapted to fit a specific exhibition space. We decided to call that version 1.0 to reflect the fact [...]

Link | Reply
Currently unrated

B-wind! v2.0 roadmap « RTiVISS research | M& 10 years, 2 months ago

[...] work we did at the AZ Residency allowed us to build a fully functional version of B-wind! adapted to fit a specific exhibition space. We decided to call that version 1.0 to reflect the fact [...]

Link | Reply
Currently unrated

New Comment

required

required (not published)

optional